New H120 Loader

1 Family (23-25HP)
Key Features
  • Compatible with the 1023E and 1025R
  • Quik-Park stands for easy attachment and removal
  • 512 pounds (232 kg) of lift capacity
  • 71.2 in. (1,809 mm) of lift height

More Info


End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pinPivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.


A nut ensures the pins remain in position.


A lubrication groove provides a path for lubrication.


End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Easily remove and mount loader to and from the tractor without tools
Quik-Park™ loader mounting systemQuik-Park™ loader mounting system


The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.


Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.


To view a video of how the Quik-Park™ system works click here.


NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.


Easy removal and mounting (shown on a noncurrent 1026R)Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without toolsMount to and from the tractor without tools


Compare >>>

Select up to 2 models to compare specifications

John DeereH120 Loader
Add Model
Add Model
Model 1025R/1023E/1026R Tractor
Front tire 18x8.5-10 4PR R4
Rear tire 26x12.00-12 4PR R4
Front axle configuration
Wheelbase 1450 mm
57 in.
Pump capacity 3.5 gpm
Rated pressure 1987 psi
Leveling configuration
Bucket used Pin On Materials 1250 mm
49 in.
Bucket weight 51 kg
112 lb
Lift capacity at full height Measured at pivot (U)
319 kg
703 lbMeasured at 500 mm ahead of pivot (V)
232 kg
512 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
331 kg
729 lbMeasured at 500 mm ahead of pivot (X)
262 kg
578 lb
Boom breakout force Measured at pivot (Y)
782 kg
1725 lbMeasured at 500 mm ahead of pivot (Z)
595 kg
1311 lb
Bucket rollback force capacity At maximum height (VV)
763 kg
1682 lbAt 59-in. (1500-mm) lift height (XX)
789 kg
1739 lbAt ground-level line (ZZ)
867 kg
1911 lb
Dimensions Maximum lift height (A)
1809 mm
71.2 in.At full height - bucket level(B)
1653 mm
65.1 in.At full height - bucket dumped (C)
1371 mm
54 in.
Overall length (I+F), ft (m) 2.6 m
8.6 ft
Overall height in carry position (J)
Digging depth (H) -101 mm
-4.0 in.
Reach At maximum height (D)
571 mm
22.5 in.At ground level - bucket level (F)
1176 mm
46.3 in.
Bucket angle Dump angle, degrees (E)
-40.1 degree (angle)Rollback angle, degrees (G)
31.2 degree (angle)Dump angle, ground
-114.0 degree (angle)
Cycle times Loader raise, seconds
4.0 secondsLoader lower, seconds
2.5 secondsBucket dump, seconds
5.7 (without regen)/2.2 (with regen) secondsBucket rollback, seconds
3.5 seconds